It can be a chore to clean the inside of your bathtub.
But what about the outside?
There are several options to keep things neat, tidy and organized.
But there’s also one that will get you to the bottom of it all.
Here’s how to do it:1.
Find a bucket2.
Cut a hole3.
Use a hacksaw or a miter saw4.
Drill a hole with a screwdriver5.
Fill the hole with waterTo remove the lid and then remove the bucket, first, use a hacksaws to cut the edge of the lid off.
Then, cut a small hole in the lid with a mitered tool to access the inside.
Next, fill the hole to the brim with water.
This will allow the water to escape.
Finally, you will need to drill a hole through the lid.
You should now be able to remove the watertight lid and clean the bucket.
To clean the interior of a bath, first open up a bucket, remove the old lid and use a mitred tool.
Then use a chisel or a chiseling tool to cut out the small hole that was made for the water.
Once the hole is cut, you can pull out the old top lid and dump the contents of the bucket inside.
You can then fill the bucket with water to get rid of any dirt and dirt particles.
The next step is to remove any dirt that remains inside the bucket by pushing a small chisel into the bucket and pulling it out.
Once you have removed the dirt, you may want to dry the area with a damp cloth.
You may also want to consider using a cleaning brush to remove grime and grime particles that may have accumulated inside the tub.
Then using a toothbrush, clean the surface with a cloth to remove stains.
To remove grout and debris from your bath tub, first wash it with soap and water.
Then rub the grout with a soft cloth.
After washing, use the toothbrush to clean it with a paper towel.
After drying, dry with a towel.
To add a bit of freshness to the bathtub, use soap and a dryer and spray the grouts with a few drops of dish soap.
Then apply a dab of dishwashing liquid to the grouting and wipe it down.
You can also soak your bathtubs in the dishwashing solution.
Just sprinkle a drop of dish washing liquid on the bathtub and let it sit for 10 minutes.
The dishwashing water will quickly clean the bath tub of any leftover grout.
Once you’ve got the bath cleaned, you’ll want to use a bucket to remove it from the tub and dry it.
If you are a little worried about how much of the bath is still inside, simply dump the bucket in the dryer.
You will then need to use your miter to remove all the dirt from the underside of the tub before it dries completely.
To clean the tub from the outside, you simply need to dip your mitere and brush it down with a rag soaked in dishwashing fluid.
Once the bath has dried, you need to dry it completely in a dry spot in the garage.
Once dry, you have a fresh tub and the opportunity to enjoy it for a little while.