By now, you probably know about the water heater controversy surrounding the bathtub.
The original model from 2007 is the one we’re talking about.
It came with an 18V DC input, and it came with a 60 Hz sound level sensor.
In 2018, the new model has an 18VDC output, a 100 Hz output, and a 50 Hz output.
The first two are still available.
The problem is that it only works with one outlet in your bathtub; if you have two, the second outlet doesn’t work either.
There’s a similar problem with the newer version, but that’s a topic for another day.
Now that the controversy has been resolved, we decided to look at the bathtub version from 2018.
It was released back in December, but it was already on sale in some stores.
It’s not too hard to find it online, so we figured we’d give it a shot.
This is a brand new, high-end version of the water-heater.
It comes with a new sound level control.
This is the first time the new version of this product has had a sound level adjustment feature, and this one is not a great value.
It works with up to four outlets in your tub.
That’s a lot of outlets.
The other new thing you can do with the water heating feature is change the temperature of the bath.
The temperature setting is just the amount of water you need to heat up to the desired temperature, and the new water heater has a temperature setting of 200 degrees Fahrenheit.
This means the water is just warm enough to start boiling at a normal temperature in your shower.
The water heater uses an external heater to control the temperature.
There are two different temperature settings.
One is just hot water, and that’s the default setting.
The second setting is what you’ll be using when you use the water valve.
If you turn the water on and off in the same way you would when you were changing a thermostat, it’s called a ‘water valve’.
If you are running a new, or older, water heater, you will have to choose which one to use.
It is important to know that a water heater doesn’t actually work without an external one.
The water heater is only useful if you’re running a water-based heater.
The new model comes with two different settings.
The one you use with a water valve is called ‘standard’ and is the default.
If the water in your bathroom has a normal level of 50°F, it is called the ‘standard’.
If the level drops to 50°, it becomes the ‘low’ setting.
If your water level drops below 50° F, it gets the ‘high’ setting and becomes the normal setting.
This picture shows the temperature setting on the new WaterHeater.
The lower the setting, the hotter it is.
The higher the setting the cooler it is, as seen in the bottom-right corner.
If you don’t have any existing water heating devices in your home, you’ll need to buy new ones.
They are only available in limited quantities, so you’ll want to be prepared for that.
If all of this seems like too much work, don’t worry.
You can purchase one of the new models for just $20.
If that seems too much, you can also buy one of each of the two previous models.
We’ve tested them both, and they both work.
The two models from 2018 are priced the same.
The cheapest model is $20, and we found that the other two are both cheaper.
We recommend that you purchase one if you want to keep one of these old models.