The best thing about owning a water fountain is that you can actually change it.
Here’s how to make it your own.
1 / 5 Step 1: Get your water pipe.
You’ll need to get your own water pipe (for the bathroom, of course) and a set of tubing.
This is where you’ll attach your water hose to your water filtration system.
A set of hose fittings will come in handy here, too.
Step 2: Get a shower head.
To use the shower, you’ll need a showerhead.
The best way to buy one is to ask your local hardware store.
For example, a Philips head shower head would be perfect for your water-filled shower.
You can get one here.
Step 3: Buy a shower pump.
This one is not so much a shower, but more of a bathtub pump.
You’re basically taking a hose and using it to pump water into your tub.
Step 4: Buy an outdoor water filter.
This filter will filter out the rainwater that makes your tub so hot, so you can get more showertime.
It also helps to use a waterproofing pad that can help keep your tub from getting wet.
Step 5: Make your own showerhead, water filter, and shower pump: DIY kit For a more traditional shower, we recommend a shower valve or showerhead with a built-in fan.
A fan also helps keep your water flowing to your tub while you’re showering.
We’ve put together a list of DIY shower heads, water filters, and fans.
If you’re thinking about getting a new showerhead that you’ve never used before, there’s also an easy way to do this yourself.
Open up the shower head’s knob and pull out the water-repelling pads.
You should now have a set that fits snugly over your showerhead hose.
If your shower head has a different hose, you can use the hose that fits the most flush with the water inside your tub, and that will work better.
You might want to change the nozzle to a water-tight one.
You want to do that for your sink, too, since it’ll give you a nice clean water line.
Find a set you like.
You could always buy the ones we tested, but these ones were pretty darn good.
We had no problems with the ones on this list.
Find your water filter and install it.
If the water filter doesn’t come with one, you might want a new one.
If it does, we suggest a water filter that has a rubber tip.
You won’t have to worry about it getting wet if you don’t use it for a while, but you’ll want to be sure it’s the right kind of rubber.
Step 6: Buy your water filters.
You may have heard of one of these DIY water filters: a Kangertech Water Filter.
They’re inexpensive and pretty great for indoor use.
The Kanger also sells a set for outdoor use, too (although that’s a bit more expensive).
Here are a few more: The Big Bump – a good filter, but only if you use it with a filter pad.
For outdoor use (not recommended for indoor water use), this is the best option.
This set includes a pad and a filter that works well with both filters.
3M Aqua Filter – a decent filter, depending on the amount of water you use.
For indoor use, this is one of the best options.
It’s not a good option for outdoor uses, but it’s a good starter filter.
The Lava Flow – a filter made for indoor and outdoor use.
We like this filter for indoor uses.
It includes a filter and a rubber nozzle.
We found it to be effective for our tubs.
The JUUL Filter – this is a good water filter for outdoor.
It doesn’t have the best design, but that doesn’t mean it doesn’t work well for your tubs (or your water pipes, for that matter).
For outdoor, it has a solid rubber nozzle, a rubber filter, a clear cap, and a foam applicator.
If this filter isn’t for you, the Aqua Flow can work fine.
For your tub: the Big Bamp – a great filter, as long as you’re not using it for indoor, but even then, it doesn.
It comes with a rubber cap and a cap for a filter.
For a shower: the Kanger’s Aqua Filter is a decent, but not great, option for indoor.
It has a very tight fitting design, which is good for indoor usage.
We’d recommend getting a good-quality, rubber-bottomed water filter with a clear filter pad for indoor or outdoor use as well. For more: